Swr-sound PR 644 Manuel d'utilisateur télécharger pdf

RU-N2N

™

RACK TUNER

Owner’s Manual

1. POWER - Switches the RU-N2N on-off.

2. INPUT - Use either this jack or the rear panel IN jack {8} to

input your bass signal.

3. MUTE - Disconnects the OUT 2 jack audio output as

indicated by the MUTE LED, useful for silent bass tuning.

MUTE can be activated from either the front panel MUTE

button or a MUTE footswitch (optional), but MUTE can

only be deactivated by the same switch that activated it.

4. TUNING LEDs - These 20 LEDs indicate the degree of

flatness or sharpness of the played note compared to the

displayed note {7} in 5 cent intervals. The RU-N2N puts on

a “light show” after 1 minute of no input.

5. SWR BADGE - Lights brightly to indicate when the played

note is “in tune” to the displayed note {7}.

6. CALIBRATION MODE and FLAT NOTE DISPLAY -

Calibration Mode: Adjusts the A4 reference frequency

(default 440Hz) from 438Hz to 445Hz. Press and hold

CAL to activate Calibration Mode. While the calibration

frequency is displayed, press CAL repeatedly to change

the reference frequency in 1Hz steps. Calibration Mode

cancels automatically.

Flat Note Display: Press CAL to display flats, rather than

sharps (“A

” instead of “G

”), as indicated by the LED. Press

CAL again to cancel.

7. NOTE DISPLAY - Indicates the closest note to the played

note (see FLAT NOTE DISPLAY above).

R e a r P a n e l

8. IN - Alternate input jack. This jack is disabled automatically

if a plug is inserted into the front panel INPUT jack {2}.

9. OUT 1 and OUT 2 - Connect either of these output jacks

to your amplifier input: OUT 1 is always active. OUT 2 can

be disabled by the MUTE-switch {3}.

10. MUTE FOOTSWITCH - Connect a standard latch-type

footswitch to enable remote audio muting, see MUTE

{3}. (Mute is active when the footswitch is in the “closed”

position.)

11. MAIN POWER INPUT - Connect the included power cord

to a grounded AC outlet in accordance with the voltage

and frequency ratings specified on the rear panel of your

RU-N2N.

12. MAIN FUSE - Protects the unit from electrical faults.

Replace a blown fuse only with the type specified on the

rear panel of your RU-N2N.

Features









        

 





www

swrsound.com

1 2

Résumé du contenu

Page 1 - RACK TUNER

RU-N2N™RACK TUNEROwner’s Manual1. POWER - Switches the RU-N2N on-off.2. INPUT - Use either this jack or the rear panel IN jack {8} to input your bas

Page 2 - Important Safety Instructions

A PRODUCT OF: SWR MUSICAL INSTRUMENTS CORPORATION CORONA, CALIFORNIA USA SWR® and RU-N2N™ are trademarks of FMIC. Other trademarks are property

Modèles reliés RU-N2N

Commentaires sur ces manuels

Pas de commentaire

Swr-sound PR 644 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Acoustique Swr-sound PR 644. SWR Sound PR 644 User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés RU-N2N

Commentaires sur ces manuels

Produits connexes et manuels pour Acoustique Swr-sound PR 644